2001 BMW X5

BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash

BMW of North America, LLC (BMW) is recalling certain 2000-2001 X5 vehicles that may be equipped with a sport steering wheel containing a Takata PSDI-4 air bag inflator. The inflator may explode during deployment due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature, and temperature cycling.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SAFETY BELT LOWER OUTBOARD ANCHORAGE BOLT ON THE DRIVER'S AND FRONT PASSENGER'S SEATS MAY NOT HAVE BEEN SECURED PROPERLY.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE NUT THAT SECURES THE AXIAL JOINT OF THE LEFT STEERING TIE ROD TO THE STEERING GEAR BOX MAY HAVE NOT HAVE BEEN TIGHTENED SECURELY. THIS COULD LEAD TO LOOSENING OF THE NUT AND, INITIALLY TO STEERING WHEEL PLAY AND/OR MISALIGNMENT, AS WELL AS NOISE FROM THE STEERING LINKAGE. IF VEHICLE OPERATION CONTINUES, THE TIE ROD COULD DISCONNECT FROM THE STEE

VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EM

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO AN ASSEMBLY ERROR DURING VEHICLE PRODUCTION, ANY OF THE THREE BOLTS THAT SECURE THE PULLEY TO THE PUMP MAY HAVE BEEN INADEQUATELY TIGHTENED.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. DUE TO AN ASSEMBLY ERROR, ONE OR BOTH SELF-LOCKING NUTS THAT SECURE THE PEDAL ASSEMBLY TO THE BOOSTER MAY HAVE BEEN CROSS-THREADED ON THE BOOSTER STUDS THAT PROTRUDE THROUGH THE FIREWALL. IN SUCH A CASE, THE NUT(S) WOULD NOT BE FULLY SEATED ON THE STUD(S).

VEHICLE DESCRIPTION: PASSENGER VEHICLES. DURING ASSEMBLY OF THESE VEHICLES, THE LOWER END OF THE SPINDLE MAY NOT HAVE BEEN INSERTED COMPLETELY INTO THE COUPLING. IN SUCH A CASE, THE FASTENING BOLT USED TO SECURE THE CONNECTION MAY NOT COMPLETELY ENGAGE THE SPINDLE WITHIN THE COUPLING. DURING DRIVING, IT WOULD BE POSSIBLE FOR THE SPINDLE TO DISCONNECT.

ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

ON CERTAIN PASSENGER VEHICLES, DUE TO A MANUFACTURING PROBLEM, THE BRAKE PEDAL ARM PIVOT SHAFT COULD LOOSEN FROM ITS SUPPORT BRACKET.

ON CERTAIN SPORT UTILITY VEHICLES, IT MAY BE POSSIBLE FOR THE FRONT BRAKE LINE TO SLIP OUT OF THE RETAINING BRACKET LOCATED AT THE FRONT STRUT. THE BRAKE HOSE THAT IS ATTACHED TO THE BRAKE LINE COULD COME IN CONTACT WITH THE TIRE AND BE SUBJECTED TO WEAR AND ABRASION.